Bestsellers

Siglent's SDS2000X Plus series Digital Storage Oscilloscopes are available in bandwidths of 100 MHz, 200 MHz, and 350 MHz, have a maximum sample rate of 2 GSa/s, a maximum record length of 200 Mpts/ch, and up to 4 analog channels + 16 digital channels mixed-signal analysis ability. The SDS2000X Plus series employs Siglent’s SPO technology with a maximum waveform capture rate of up to 120,000 wfm/s (normal mode, up to 500,000 wfm/s in Sequence mode), 256-level intensity grading display function plus a color temperature display mode. It also employs an innovative digital trigger system with high sensitivity and low jitter. The trigger system supports multiple powerful triggering modes including serial bus triggering. History waveform recording, Sequence acquisition, Search and Navigate functions allow for extended waveform records to be captured, stored, and analyzed. An impressive array of measurement and math capabilities, options for a 50 MHz waveform generator, as well as serial decoding, mask test, bode plot, and power analysis are also features of the SDS2000X Plus. A 10-bit acquisition mode helps to satisfy applications that require more than 8-bit resolution. The large 10.1" capacitive touch screen supports multi-touch gestures, while the remote web control, mouse and external keyboard support greatly improve the operating efficiency of the SDS2000X Plus. Features 100 MHz, 200 MHz, 350 MHz (upgradable to 500 MHz) models Real-time sampling rate up to 2 GSa/s Record length up to 200 Mpts Serial bus triggering and decoder, supports I²C, SPI, UART, CAN, LIN, CAN FD, FlexRay, I²S and MIL-STD-1553B Provide 10 bit mode, Vertical and Horizontal Zoom Capacitive touch screen supports multi-touch gestures Siglent SDS2000X Plus Oscilloscopes   SDS2102X Plus SDS2104X Plus SDS2204X Plus SDS2354X Plus Bandwidth 100 MHz 100 MHz 200 MHz 350 MHz Channels 2 4 4 4 Real-time sampling rate 2 GSa/s 2 GSa/s 2 GSa/s 2 GSa/s Capture rate 120,000 wfm/s 120,000 wfm/s 120,000 wfm/s 120,000 wfm/s Memory depth 200 Mpts/ch 200 Mpts/ch 200 Mpts/ch 200 Mpts/ch Included Siglent SDS2354X Plus Oscilloscope Passive probes Power cord USB cable Manual Downloads Datasheet Manual Quick guide User manual Firmware

Read more less

The X-Carve CNC machine is great for Makers looking to start their CNC journey. Reliable, customizable, and expandable: X-Carve is also the best-selling machine for entrepreneurs and small businesses. Start producing, no CNC knowledge required. X-Carve and Easel simplify 3D carving so you can begin working with wood, plastics and other materials in minutes. Features Carves wood, plastics, and materials like aluminum, Corian®️, and linoleum up to 37 inches wide. Easy-to-follow assembly instructions will help familiarize you with your machine. This model V2 is 3x faster, more rigid, and more accurate than the original X-Carve. Design -> Carve -> Sell Design: Sketch out your own idea and upload to Easel software, or browse from the library of over 3 million designs. Carve: Easel controls the spindle and makes calculations so there's no guesswork. Sell: X-Carve + Easel speeds up production so you can take on more jobs and get them out faster. The bundle pays for itself in no time. Carvable Materials Wood/Wood Composites: Hardwoods, softwoods, MDF, plywoods, etc. Plastics: HDPE, Delrin®️, polycarbonate, acrylic, Corian®️, etc. Non-Ferrous Metals: Aluminum, brass, copper, etc. Import File Types: G-Code, SVG, or DXF files from any software Software Compatible with standard g-code and GRBL 1 Year of Easel Pro Included (world’s easiest CAD/CAM software) Size & Weight Work Area: 750 x 750 x 114 mm (29.5 x 29.5 x 4.5') Machine Footprint: 1041 x 1321 x 559 mm (41 x 52 x 22') Maximum Passthrough Sheet Width: 940 mm (37') Finish: Anodized Aluminum Product Weight: 45 kg Shipping Weight: 50 kg Included X-Carve Base & Hardware Rail Kit DeWalt 26200 Spindle X-Controller Kit Nema 23 Motors Kit Waste Board Drag Chain Toolkit Homing Kit Z-Probe Kit Side Board Dust Control System Clamp Set Digital Calipers 1 Year Easel Pro Software Downloads Instructions Support 3D Models and Drawings

Read more less

TurtleBot 4 is the next-generation of the world’s most popular open source robotics platform for education and research, offering better computing power, better sensors and a world class user experience at an affordable price point.TurtleBot 4 Lite is equipped with an iRobot Create 3 mobile base, a powerful Raspberry Pi 4 running ROS 2, OAK-D spatial AI stereo camera, 2D LiDAR and more. All components have been seamlessly integrated to deliver an out-of-the-box development and learning platform.Specifications Base platform iRobot Create 3 Wheels (Diameter) 72 mm Ground Clearance 4.5 mm On-board Computer Raspberry Pi 4 (4 GB) Maximum linear velocity 0.31 m/s in safe mode0.46 m/s without safe mode Maximum angular velocity 1.90 rad/s Maximum payload 9 kg Operation time 2h 30m – 4h depending on load Charging time 2h 30m Lidar RPLIDAR A1M8 Camera OAK-D-Lite User Power VBAT @1.9 A5 V @ Low current3.3 V @ Low current USB Expansion 2x USB 2.0 (Type A)2x USB 3.0 (Type A) Programmable LEDs Create 3 Lightring Buttons and Switches 2x Create 3 User buttons1x Create 3 Power Button Battery 26 Wh Lithium Ion (14.4 V nominal) Charging Dock Included Size (L x W x H) 342 x 339 x 192 mm Weight 3.3 kg DownloadsUser Manual

Read more less

World’s Most Popular ROS Platform TurtleBot is the most popular open source robot for education and research. The new generation TurtleBot3 is a small, low cost, fully programmable, ROS based mobile robot. It is intended to be used for education, research, hobby and product prototyping. Affordable Cost TurtleBot was developed to meet the cost-conscious needs of schools, laboratories and companies. TurtleBot3 is the most affordable robot among the SLAM-able mobile robots equipped with a 360° Laser Distance Sensor LDS-01. ROS Standard The TurtleBot brand is managed by Open Robotics, which develops and maintains ROS. Nowadays, ROS has become the go-to platform for all the roboticists around the world. TurtleBot can be integrated with existing ROS-based robot components, but TurtleBot3 can be an affordable platform for whom want to get started learning ROS. Extensibility TurtleBot3 encourages users to customize its mechanical structure with some alternative options: open source embedded board (as a control board), computer and sensors. TurtleBot3 Waffle Pi is a two-wheeled differential drive type platform but it is able to be structurally and mechanically customized in many ways: Cars, Bikes, Trailers and so on. Extend your ideas beyond imagination with various SBC, sensors and motors on a scalable structure. Modular Actuator for Mobile Robot TurtleBot3 is able to get a precise spatial data by using 2 DYNAMIXEL’s in the wheel joints. DYNAMIXEL XM series can be operated by one of 6 operating modes (XL series: 4 operating modes): Velocity control mode for wheels, Torque control mode or Position control mode for joint, etc. DYNAMIXEL can be used even to make a mobile manipulator which is light but can be precisely controlled with velocity, torque and position control. DYNAMIXEL is a core component that makes TurtleBot3 perfect. It is easy to assemble, maintain, replace and reconfigure. Open Control Board for ROS The control board is open-sourced in hardware wise and in software wise for ROS communication. The open source control board OpenCR1.0 is powerful enough to control not only DYNAMIXEL’s but also ROBOTIS sensors that are frequently being used for basic recognition tasks in cost effective way. Various sensors such as Touch sensor, Infrared sensor, Color sensor and a handful more are available. The OpenCR1.0 has an IMU sensor inside the board so that it can enhance precise control for countless applications. The board has 3.3 V, 5 V, 12 V power supplies to reinforce the available computer device lineups. Open Source The hardware, firmware and software of TurtleBot3 are open source which means that users are welcomed to download, modify and share source codes. All components of TurtleBot3 are manufactured with injection molded plastic to achieve low cost, however, the 3D CAD data is also available for 3D printing. Specifications Maximum translational velocity 0.26 m/s Maximum rotational velocity 1.82 rad/s (104.27 deg/s) Maximum payload 30 kg Size (L x W x H) 281 x 306 x 141 mm Weight (+ SBC + Battery + Sensors) 1.8 kg Threshold of climbing 10 mm or lower Expected operating time 2h Expected charging time 2h 30m SBC (Single Board Computers) Raspberry Pi 4 (2 GB RAM) MCU 32-bit ARM Cortex-M7 with FPU (216 MHz, 462 DMIPS) Remote Controller RC-100B + BT-410 Set (Bluetooth 4, BLE) Actuator XL430-W210 LDS (Laser Distance Sensor) 360 Laser Distance Sensor LDS-01 or LDS-02 Camera Raspberry Pi Camera Module v2.1 IMU Gyroscope 3 AxisAccelerometer 3 Axis Power connectors 3.3 V/800 mA5 V/4 A12 V/1 A Expansion pins GPIO 18 pinsArduino 32 pin Peripheral 3x UART, 1x CAN, 1x SPI, 1x I²C, 5x ADC, 4x 5-pin OLLO DYNAMIXEL ports 3x RS485, 3x TTL Audio Several programmable beep sequences Programmable LEDs 4x User LED Status LEDs 1x Board status LED1x Arduino LED1x Power LED Buttons and Switches 2x Push buttons, 1x Reset button, 2x Dip switch Battery Lithium polymer 11.1 V 1800 mAh / 19.98 Wh 5C PC connection USB Firmware upgrade via USB / via JTAG Power adapter (SMPS) Input: 100-240 VAC 50/60 Hz, 1.5 A @maxOutput: 12 VDC, 5 A Downloads ROS Robot Programming GitHub E-Manual Community

Read more less

The Portenta C33 is a powerful System-on-Module designed for low-cost Internet of Things (IoT) applications. Based on the R7FA6M5BH2CBG microcontroller from Renesas, this board shares the same form factor as the Portenta H7 and it is backward compatible with it, making it fully compatible with all Portenta family shields and carriers through its high-density connectors. As a low-cost device, the Portenta C33 is an excellent choice for developers looking to create IoT devices and applications on a budget. Whether you're building a smart home device or a connected industrial sensor, the Portenta C33 provides the processing power and connectivity options you need to get the job done. Quickly deploying AI-powered projects becomes quick and easy with Portenta C33, by leveraging a vast array of ready-to-use software libraries and Arduino sketches available, as well as widgets that display data in real time on Arduino IoT Cloud-based dashboards. Features Ideal for low-cost IoT applications with Wi-Fi/Bluetooth LE connectivity Supports MicroPython and other high-level programming languages Offers industrial-grade security at the hardware level and secure OTA firmware updates Leverages ready-to-use software libraries and Arduino sketches Perfect to monitor and display real-time data on Arduino IoT Cloud widget-based dashboards Compatible with Arduino Portenta and MKR families Features castellated pins for automatic assembly lines Cost Effective Performance Reliable, secure and with computational power worthy of its range, Portenta C33 was designed to provide big and small companies in every field with the opportunity to access IoT and benefit from higher efficiency levels and automation. Applications Portenta C33 brings more applications than ever within users’ reach, from enabling quick plug-and-play prototyping to providing a cost-effective solution for industrial-scale projects. Industrial IoT gateway Machine monitoring to track OEE/OPE Inline quality control and assurance Energy consumption monitoring Appliances control system Ready-to-use IoT prototyping solution Specifications Microcontroller Renesas R7FA6M5BH2CBG ARM Cortex-M33: ARM Cortex-M33 core up to 200 MHz 512 kB onboard SRAM 2 MB onboard Flash Arm TrustZone Secure Crypto Engine 9 External Memories 16 MB QSPI Flash USB-C USB-C High Speed Connectivity 100 MB Ethernet interface (PHY) Wi-Fi Bluetooth Low Energy Interfaces CAN SD Card ADC GPIO SPI I²S I²C JTAG/SWD Security NXP SE050C2 Secure Element Operating Temperatures -40 to +85 °C (-40 to 185 °F) Dimensions 66,04 x 25,40 mm Downloads Datasheet Schematics

Read more less

An adapter for connecting a servo meter with croc/alligator clips. This is a handy little clip to connect a servo motor with 5.4 mm header socket using alligator clips. It is ideal for use with boards like the BBC micro:bit and Adafruit's Circuit Playground Express or Gemma. Width: 27 mm Height: 35 mm Downloads Datasheet

Read more less

The MPLAB ICD 5 In-Circuit Debugger/Programmer offers advanced connectivity and power options for developers of designs based on PIC, AVR and SAM devices and dsPIC Digital Signal Controllers (DSCs). It debugs and programs with the powerful and easy-to-use graphical user interface of MPLAB X Integrated Development Environment (IDE). This next-generation tool offers a variety of capabilities and features that you would normally find in more expensive products to speed up your development and reduce your debug time. With its support for Fast Ethernet connectivity and Power over Ethernet Plus (PoE+), the MPLAB ICD 5 Debugger/Programmer offers flexibility and the convenience of remote development while isolating your application from environmental conditions. Whether you're an experienced developer or just starting out, the MPLAB ICD 5 In-Circuit Debugger/Programmer will accelerate your development process and help you take your designs to the next level. Features USB-C interface makes it easy to connect to a PC High-Speed USB 2.0 host PC interface supports speeds up to 480 Mbps for fast data transfer rates PoE+ (IEEE 802.3at) offers a convenient and flexible option to power up the debugger/programmer and deliver power to the target Fast Ethernet connectivity supports speeds up to 100 Mbps Wired/DHCP/APIAP IP addressing Static IP addressing Connects to more targets using an RJ11 or RJ45 modular cable Includes adapter board that supports JTAG, SWD, ICSP and AVR MCU protocols Professional-grade safety features and support for devices ranging from 1.2 V to 5.5 V Safely powers the target at up to 1 A using the PoE power supply or a PC with a USB-C connector Receives feedback from debugger when an external power supply is needed for the target CE and RoHS compliant, conforms to industry standards Advanced trace capabilities Support for instrumented trace via the Arm Serial Wire Debug (SWD) interface Power monitoring Allows you to optimize your design's power consumption Captures power data, such as current and voltage values Works with MPLAB Data Visualizer, which graphically analyzes power data Data gateway interfaces UART over Windows Virtual COM Port (VCP) Power Continuous Integration/Continuous Delivery (CI/CD) Support Can be implemented over Ethernet using hardware in the loop Works with CI/CD wizard available with MPLAB X IDE v6.10 and later to set up system using Jenkins and Docker Powerful debugging High-powered debugging with MPLAB X IDE Multiple breakpoints, stopwatch and source code file debugging Selectable pull-up/pull-down option to the target interface in MPLAB X IDE’s editor for quick program modification and debugging High-speed programming Quick firmware reloading for fast debugging and in-circuit reprogramming Debugging speed can be adjusted for optimized programming Included MPLAB ICD 5 In-Circuit Debugger and Programmer USB-C cable Adapter kit Downloads User guide Datasheet

Read more less

Unlock a world of interactive learning with the Science Kit R3's robust hardware and software. With the Arduino Nano RP2040 Connect, Arduino Science Carrier R3, and an impressive array of sensors at your disposal, you'll have everything you need to embark on an exhilarating educational journey. Meanwhile, the Science Journal app effortlessly bridges the gap between theory and practice, facilitating real-time data collection, recording, and interpretation. The kit elevates the learning experience by nurturing an enhanced understanding of complex physics concepts through engaging hands-on experimentation. It promotes scientific literacy and hones critical thinking skills by providing real-world application scenarios. With its intuitive content guide, both teachers and students can navigate through scientific explorations with ease. Features Hands-on experimental learning: perform physical experiments, transforming abstract physics concepts into tangible and interactive experiences. Real-time data collection & analysis: With the integration of the Science Journal app, the kit allows students to collect, record, and interpret real-time data with mobile devices, strengthening their data literacy and scientific inquiry skills. Teacher and student-friendly design: Equipped with a preloaded program, the kit requires no prior knowledge of coding or electronics. It also features Bluetooth connectivity for easy data transmission from the Arduino board to the students' mobile devices. Comprehensive sensor ecosystem: The kit comes with multiple sensors, providing a wide range of data collection possibilities and keeping it adaptable to evolving educational needs. Free guided courses – Explore Physics: Includes an intuitive courses guide that assists teachers and students in using the kit, presenting and analyzing data, and evaluating experimental outcomes. These courses also help students effectively communicate their scientific discoveries. Comprehensive teaching support: With its intuitive guide, the Arduino Science Kit R3 eases the instructional process for teachers. It not only instructs on kit usage, but also assists in data presentation, analysis, and evaluation, ensuring students communicate their scientific discoveries effectively. Specifications Hardware Arduino Nano RP2040 Connect Arduino Science Carrier R3 Embedded sensors: Air quality, temperature, humidity & pressure IMU: 6-axis linear accelerometer, gyroscope, and magnetometer Proximity, ambient light, light color Voltage or electric potential difference Electrical current Electrical resistance Function generators to see and hear the effect of frequency, amplitude, and phase on a sound wave Ambient sound intensity sensor Ports 2x Grove analog inputs (for external temperature-probe sensor) 2x Grove I²C ports (for external distance & ping-echo sensor) 1x Battery JST connector 2x Output ports connected to lower power signal from function generators (future generation) 1x 3.3 V output port and Ground 2x speaker ports connected to function generators Other 50 cm double-ended cable (blue): crocodile clips one end, banana plug the other 20 cm double-ended cable (black): crocodile clips one end, banana plug the other 20 cm double-ended cable (red): crocodile clips one end, banana plug the other VELCRO strips Silicon stands External temperature probe sensor Ultrasonic distance sensor Grove cable 4-pin housing with lock x2 (L=200 mm) USB-C Cable 50 cm double-ended cable (yellow): crocodile clips one end, banana plug the other 2x Speakers Cable for battery holder with JST connector Battery holder for four 1V5 AA batteries

Read more less

The PeakTech 1265 is an affordable 30 MHz 2-channel digital storage oscilloscope with a high-resolution TFT color display and extensive additional functions. It has a sampling rate of up to 250 MS/s and convinces with its high quality and easy handling with the best price/performance ratio. To quickly display each incoming waveform, simply press the Autoset key and the oscilloscope itself searches for the best possible display. With Autoscale, however, the scaling of the time base can be adjusted in a user-friendly manner. This oscilloscope has a VGA output for displaying the oscilloscope display on an external monitor or projector. Features 2-channel oscilloscope with 30 MHz analog bandwidth at max. 250 MS/s sampling rate 8 inch (20 cm) TFT color display with 800 x 600 pixels LAN, USB host, USB device & VGA interface Autoset function for user-friendly operation Recording length of max. 10,000 points Automatic measurement modes, XY mode and FFT function Specifications Bandwidth 30 MHz Channels 2 Screen size (TFT) 8' (20 cm) Resolution 800 x 600 Pixel Display Type Color-TFT Sampling 1 CH 250 MS/s Sampling 2 CH 125 MS/s Hor. scale max. 100 s/div Hor. scale min. 5 ns/div Memory depth 10,000 Points Rise Time < 14 ns Vert. resolution 8 Bit Vert. scale max. 10 V/div Vert. scale min. 2 mV/div Interfaces 1x USB, 1x LAN, 1x VGA Mains voltage 110/240 V AC; 50/60 Hz Included PeakTech 1265 Oscilloscope USB cable Software CD for Windows Power cord 2 probes BNC cable Carrying case Manual Downloads Software Datasheet_DE-EN Datasheet_FR Datasheet_IT Datasheet_ES

Read more less

In this lockable universal carrying case you can safely store your sensitive electronic devices while traveling and on the way to work. In order to adapt these sturdy cases universally to the respective equipment, each case is padded with a 1 cm thick foam insert and additionally designed with two 3 cm thick, removable cubic foam inserts, which can be easily adjusted without additional tools. Due to the double notch in the closing edge, these high-quality case offer a high level of safety against the ingress of dust or splash water and are therefore the ideal companion for daily work in the field. Features Integrated lock Stable carrying case for all kinds of work Including cube foam for easy adjustment of the desired shape Changeable cube foam available separately Specifications Material Aluminum Color Black Dimensions 405 x 150 x 330 mm Dimensions (inside) 390 x 130 x 315 mm Payload (max.) 16.2 kg Lock Snap lock (lockable) Cube foam insert Yes Design/Type Aluminum frame/Composite material Downloads Manual

Read more less

MDP-M01 is a display control module equipped with a 2.8-inch TFT display screen, the screen can be turned 90 degrees, which is convenient for users to view data and waveform. MDP-M01 can realize online display and control with MDP-P906 mini digital power supply modules and other modules of MDP system through 2.4 GHz wireless communication, and can control up to 6 sub-modules at the same time. Specifications Screen size 2.8' TFT Screen resolution 240 x 320 Power Micro USB power input, or taking power from sub-module via dedicated power cable Input DC 5 V/0.3 A Other functions Can control up to 6 sub-modulesUpgrade formware through Micro USB Dimensions 107 x 66 x 13.6 mm Weight 133 g Included 1x MDP-M01 Smart Digital Monitor 1x Cable (2.5 mm jack to Micro USB) Downloads User Manual v3.4 Firmware v1.32

Read more less

The Portenta Cat. M1/NB IoT GNSS Shield allows you to enhance the connectivity features of your Portenta H7 applications. The shield leverages a Cinterion TX62 wireless module by Thales, designed for highly efficient, low-power IoT applications to deliver optimized bandwidth and performance. The Portenta Cat. M1/NB IoT GNSS Shield combines with the strong edge computing power of the Portenta H7 to enable the development of asset tracking and remote monitoring applications in industrial settings, as well as in agriculture, public utilities and smart cities. The shield offers cellular connectivity to both Cat. M1 and NB-IoT networks with the option to use eSIM technology. Easily track your valuables – across the city or worldwide – with your choice of GPS, GLONASS, Galileo or BeiDou. Features Change connectivity capabilities without changing the board Add NB-IoT, CAT. M1 and positioning to any Portenta product Possibility to create a small multiprotocol router (WiFi - BT + NB-IoT/CAT. M1) Greatly reduce communication bandwidth requirements in IoT applications Low-power module Compatible also with MKR boards Remote Monitoring Industrial and agricultural companies can leverage the Portenta Cat. M1/NB IoT GNSS Shield to remotely monitor gas detectors, optical sensors, machinery alarm systems, biological bug traps and more. Technology providers providing smart city solutions can compound the power and reliability of the Portenta H7 with the Portenta Cat. M1/NB IoT GNSS Shield, to connect data and automate actions for a truly optimized use of resources and enhanced user experience. Asset Monitoring Add monitoring capabilities to any asset by combining the performance and edge computing features of the Portenta family boards. The Portenta Cat. M1/NB IoT GNSS Shield is ideal to monitor valuable goods and also for monitoring industrial machinery and equipment. Specifications Connectivity Cinterion TX62 wireless module; NB-IoT - LTE CAT.M1; 3GPP Rel.14 Compliant Protocol LTE Cat. M1/NB1/NB2; UMTS BANDS: 1 / 2 / 3 / 4 / 5 / 8 / 12(17) / 13 / 18 / 19 / 20 / 25 / 26 / 27 / 28 / 66 / 71 / 85; LTE Cat.M1 DL: max. 300 kbps, UL: max. 1.1 Mbps; LTE Cat.NB1 DL: max. 27 kbps, UL: max. 63 kbps; LTE Cat.NB2 DL: max. 124 kbps, UL: max. 158 kbps Short messaging service (SMS) Point-to-point mobile terminated (MT) and mobile originated (MO) Text Mode; Protocol Data Unit (PDU) Mode Localization support GNSS capability (GPS/BeiDou/Galileo/GLONASS) Other Embedded IPv4 and IPv6 TCP/IP stack access; Internet Services: TCP server/client, UDP client, DNS, Ping, HTTP client, FTP client, MQTT client Secure Connection with TLS/DTLS Secure boot Dimensions 66 x 25.4 mm Operating temperature -40° C to +85° C (-104° F to 185°F) Downloads Datasheet Schematics

Read more less

The Portenta Vision Shield LoRa brings industry-rated features to your Portenta. This hardware add-on will let you run embedded computer vision applications, connect wirelessly via LoRa to the Arduino Cloud or your own infrastructure, and activate your system upon the detection of sound events. The shield comes with: a 320x320 pixels camera sensor: use one of the cores in Portenta to run image recognition algorithms using the OpenMV for Arduino editor long range 868/915 MHz LoRa wireless connectivity: get your Portenta H7 connected to the Internet of Things with low power consumption two on-board microphones for directional sound detection: capture and analyse sound in real-time JTAG connector: perform low-level debugging of your Portenta board or special firmware updates using an external programmer SD-Card connector: store your captured data in the card, or read configuration files The Vision Shield LoRa has been designed to work with the Arduino Portenta H7. The Portenta boards feature multicore 32-bit ARM Cortex processors running at hundreds of megahertz, with megabytes of program memory and RAM. Portenta boards come with WiFi and Bluetooth. Specifications Camera Himax HM-01B0 camera module (manufacturer site) Resolution 320 x 320 active pixel resolution with support for QVGA Image sensor High sensitivity 3.6μ BrightSense pixel technology Microphone 2x MP34DT05 (datasheet) Connectivity 868/915MHz ABZ-093 LoRa Module with ARM Cortex-M0+ (datasheet) Dimensions 66 x 25 mm Weight 8 g Downloads Datasheet Schematics

Read more less

These templates are your starting point if you’re building a Raspberry Pi HAT.Each pack contains six Raspberry Pi B+ templates.DownloadsGerber files

Read more less

The i-CON PICO suits all SMT und PTH soldering applications in production, repair and R&D, where antistatic design is not a must.The i-CON PICO does without ESD capability but has an impact-proof housing. The i-TOOL PICO has a heat-resistant cable and uses an exchangeable high-performance heating element in the combined metal/plastic housing.The compact tool holder with silicone base and spring support for the soldering iron has room for the dry sponge and soldering tips.Features Digital soldering station with ultra light and ergonomic i-TOOL NANO soldering iron Small footprint (145 x 80 mm) – saves valuable workbench space Three fixed temperature settings or continuous temperature setting from 150 °C up to 450 °C Three selectable energy levels Automatic stand-by function and non-operative mode saves energy & tip life Complete system parameterization via simple PC software and microSD card Fully antistatic according to MIL-SPEC/ESA standards Specifications Max. rating 80 W Power rating 68 W Temperature range 150-450 °C Heat up time 9 s Nominal voltage 230 V AC Secondary voltage 16.5 V Antistatic design No Digital display Yes Weight 1.9 kg Dimensions 80 x 145 x 103 mm (W x D x H) DownloadsDatasheet

Read more less

Integral Light Source, High Precision and Uniformity The self-developed integral light source adopts the reflection & refraction to make the light intensity distribution of the whole screen uniform, and each dimension of the model with consistent accuracy. Integral Light Source vs Matrix Light Source Integral light source: It is composed of 12 lamp beads, and each lamp bead e is composed of 4 light-emitting chips, the uniformity of light source energy can reach more than 80%. When the individual lamp beads are attenuated, the uniformity of the printed model e is not affected. Ordinary light source: It consists of many ultraviolet lamp beads evenly arranged in a row. The light intensity of the lamp bead splicing area is uneven, and the lamp bead damage has a greater impact on the uniformity of the printed model. Wi-Fi/APP Remote Control Creality Cloud APP for monitor printing progress, adjust the printing settings, Start/Stop prints. Built-in Wi-Fi allows one-click upgrades to the firmware. Double Heat Dissipation, Efficient Purification Specially designed dual heat dissipation system, precise and intelligent control to detect the heat source, and quickly evaporate heat. Activated carbon air filtration system to reduce odor emission and optimize printing experience. Specifications LCD pixel 3840 x 2400 LCD screen 8.9' monochrome Light source Integral Light Source Printing size 192 x 120 x 200 mm XY-axis precision 0.05 mm Printing speed 1-4s/layer Layer thickness 0.01-0.2 mm Interaction screen 5' color touch screen Material 405 nm UV Resin Auto-leveling Easy manual leveling Input power 100-240 V Machine size 330 x 301 x 572 mm Machine weight 10.6 kg

Read more less

This pair of extended 'outrigger' feet for AxiDraw V3 and AxiDraw V3 XLX consists of a pair of machined aluminum struts with large 1/2' diameter (12 mm) rubber foot pads set securely in recesses. It greatly increases the effective base area of the AxiDraw, making it much more stable when plotting, and capable of carrying heavier tools without worry of tipping over. In addition to providing a larger footprint, the outrigger feet also provide four mounting holes that make it easier to secure your AxiDraw to a surface, should you choose to do so. Each foot strut has two top-side accessible #8/M4 clearance holes. Installation is straightforward: Remove the two screws that hold the standard foot plates to the bottom of the AxiDraw, and attach these struts in their place with the included screws. Compatible with: AxiDraw V3 AxiDraw V3 XLX

Read more less

The tripod adapter is custom machined from a solid block of aluminum, and provides two standard tripod mounting points with 3/8-16 and light-duty 1/4-20 thread respectively. This allows you to mount the AxiDraw to a tripod, should you have reason to do so. We would highly recommend using a sturdy tripod with a 3/8-16 connection point and appropriate counterweight (sand bag, lifting weights, etc) to balance the weight of the AxiDraw while in use. Installation is straightforward, and does not require any tools other than those included with AxiDraw: Remove the existing foot pads from the AxiDraw (either standard or outrigger feet, depending on model) and attach this plate to the captured nuts in the bottom surface of the AxiDraw. For AxiDraw SE/A3 (April 2019 and newer), the tripod adapter attaches directly to tapped holes in the base of the machine. This heavy-duty tripod adapter is compatible with AxiDraw V3, AxiDraw V3/A3 and AxiDraw V3 XLX. It is also compatible with AxiDraw SE/A3 manufactured in April 2019 and newer. Specifications Material: Anodized 6061-T6 aluminum Size: 3.90 x 2.36 x 0.35 inches (99.1 x 60 x 8.3 mm) Weight: Approximately 144 g Mounting hardware: included (four M4x10 high-strength steel mounting screws)

Read more less

This rigid end effector plate is designed to be in place of the standard AxiDraw pen-lift Z stage, and provides an alternative mounting scheme for mounting various things to the end of the AxiDraw's arm, for applications where greater rigidity is important but the lifting ability of the standard Z stage is not required. The rigid end effector is custom machined from aluminum, and provides six M3 tapped holes and two M4 tapped holes for mounting what ever it is that you would like to mount to the end of the AxiDraw, to use it as a 2D robot arm. The hole pattern is compatible with the AxiDraw pen clip, so you can, if you like, mount the AxiDraw's pen clip to this end effector. Installation is straightforward, but requires a Pozidrive PZ2 screwdriver, not included*. Remove the AxiDraw's pen clip, and then remove the pen-lift Z stage by removing two screws with the PZ2 screwdriver. Install the rigid end effector plate in its place, using the two included mounting screws and the PZ2 screwdriver. You may wish to also tie back or fully remove the AxiDraw's cable guides, which normally extend to power the pen-lift stage. Specifications Material: Anodized 6061-T6 aluminum Size: 1.97 x 1.38 x 0.19 inches (50 x 35 x 4.8 mm) Weight: Approximately 11 g Mounting hardware: included (Two M4x12 pozidrive-head self-tapping screws) Compatibility All AxiDraw V3 family pen plotters AxiDraw V3/A3 AxiDraw SE/A3 AxiDraw MiniKit models

Read more less

Extra easel boards for AxiDraw V3/A3 can be used as replacements, or for staging additional workpieces for quickly swapping to the next plot. This set consists of one 11.75 x 17 inch (29.85 x 43.18 cm) hardboard platen with rubber feet attached, plus eight micro binder clips.

Read more less

Blank 3” x 4” FR­4 boards are ready for printing your circuitry on. Just clamp them to the printing platform and press print to dispense the ink.

Read more less

Double Backlit User Interface: The dual backlit button is just like the single backlit button, but twice the fun! Use this component when you need to operate something up and down, or right to left. Using cut-out vinyl, you can create icons and stickers on fabric that show your users button functionality. Features Component: 4.6' x 6.3' Individual Button Size: 1' radius circle Press Durability: Up to 10,000 presses under 5lbf LED Voltage: 5 V

Read more less

The mini single pressure sensor gives you an analog read that maps to force on the sensor. The more you press, the lower the resistance goes, perfect for on-body pressure related sensing like ribcage expansion for breathing. This little one is small, but mighty, making it convenient for small surface area applications. Features Component: 2` x 1` Sensing area: .75` x .75` Thickness: Approx 20mils

Read more less

The single backlit button is a simple mechanical switch that comes with an LED inside. When you press the button, the circuit is completed, driving your pin high or low. Use the embedded LED to make a glowing power icon, logo , or whatever suits your fancy. Features Press durability: Up to 10,000 times pressing under 5lbf (22.24 N) LED Voltage: 5 V Component: 2' x 3' Individual (5,08 cm x 7,62 cm) Button Size: 1' radius circle (2,54 cm)

Read more less