Envox EEZ Bench Box 3 (BB3) 4-ch - Modular Test & Measurement Solution

  • BrandEnvox

Description

Need a modular, open and hackable test and measurement chassis? The four-channel Envox EEZ Bench Box 3 (BB3) includes includes two DCP405 advanced DC power modules and one DCM224 dual output supplementary DC power module (max. output power 465 W). It is a great solution for product development, debugging, and circuit testing.

Features

  • Modular design – use up to three modules in any combination
  • 4.3' TFT color touchscreen display with customizable and responsive GUI
  • Four types of power outputs coupling under firmware control (incl. in series for max. 80 V and parallel for max. 10 A)
  • Max. output power: 465 W
  • Multiple output values views including YT-view for DCP405 modules
  • Programmable lists
  • Tracking mode
  • OVP, OCP, OPP and OTP protection
  • Speed controlled cooling fan
  • SCPI programming via USB or Ethernet
  • MicroPython scripting, Node-RED integration
  • RTC with NTP synchronization
  • MQTT support
  • Easily programmable with 400+ SCPI commands
  • Built-in Ethernet, USB and UART for remote control
  • Build-in removable 8 GB micro SD card for data logging and programming
  • Fast boot, FreeRTOS firmware
  • Quiet operation thanks to multi-sensor fan speed control
  • Software simulator
  • Quick and easy upgrade of the DIB module’s firmware
  • Easy maintenance, disassembling and repair

Typical Applications

  • Product development and debugging
  • Laboratories and educational facilities
  • Quality control and assessment
  • Automobile electronic circuit testing
  • Production automation testing
  • Device or circuit characteristic verification and troubleshooting

Technical Specifications

  • STM32F769 32-bit ARM Cortex-M7 MCU, 216 MHz, 2 MB Flash, 512 KB SRAM
  • Digital I/O: 2x buffered inputs and 2x buffered outputs (alternative functions: UART, PWM out)
  • Rotary encoder with switch
  • 1x user switch
  • 3x dedicated SPI channels (2x Chip selects per channel), 40-pin IDC connector (DIB v1.0)
  • Battery backup (CR2032 button cell type)
  • USB FS OTG
  • Ethernet PHY (10/100 Mbit/s)
  • 32 KB I²C system EEPROM
  • 8 MB SDRAM
  • 8 GB Micro SD card
  • 4.3' TFT color resistive touchscreen display with brightness control
  • SWG/JTAG connector (optional)
  • Small on-board speaker
  • Four power relays for various power outputs coupling
  • Full range autoswitch AC input (115 / 230 Vac)
  • AC Soft-start (In-rush current limitation) and stand-by
  • AC IEC C14 inlet with two 20 x 5 mm fuse
  • AC power switch
  • AC power input protection and EMI filter
  • Standby LED indicator
  • Ø80 mm DC cooling fan with speed control
  • Kensington lock slot™
  • Compact size: 290 (W) x 123 (H) x 240 (D) mm
  • Weight (populated with 2x DCP405 and 1x DCM224): 4.05 kg

Product form

Need a modular, open and hackable test and measurement chassis? The four-channel Envox EEZ Bench Box 3 (BB3) includes includes... Read more

Out of stock

€ 899,00 incl. VAT
Members € 809,10

    Details

    SKU: 19825
    EAN: 0717995451235

    Description

    Need a modular, open and hackable test and measurement chassis? The four-channel Envox EEZ Bench Box 3 (BB3) includes includes two DCP405 advanced DC power modules and one DCM224 dual output supplementary DC power module (max. output power 465 W). It is a great solution for product development, debugging, and circuit testing.

    Features

    • Modular design – use up to three modules in any combination
    • 4.3' TFT color touchscreen display with customizable and responsive GUI
    • Four types of power outputs coupling under firmware control (incl. in series for max. 80 V and parallel for max. 10 A)
    • Max. output power: 465 W
    • Multiple output values views including YT-view for DCP405 modules
    • Programmable lists
    • Tracking mode
    • OVP, OCP, OPP and OTP protection
    • Speed controlled cooling fan
    • SCPI programming via USB or Ethernet
    • MicroPython scripting, Node-RED integration
    • RTC with NTP synchronization
    • MQTT support
    • Easily programmable with 400+ SCPI commands
    • Built-in Ethernet, USB and UART for remote control
    • Build-in removable 8 GB micro SD card for data logging and programming
    • Fast boot, FreeRTOS firmware
    • Quiet operation thanks to multi-sensor fan speed control
    • Software simulator
    • Quick and easy upgrade of the DIB module’s firmware
    • Easy maintenance, disassembling and repair

    Typical Applications

    • Product development and debugging
    • Laboratories and educational facilities
    • Quality control and assessment
    • Automobile electronic circuit testing
    • Production automation testing
    • Device or circuit characteristic verification and troubleshooting

    Technical Specifications

    • STM32F769 32-bit ARM Cortex-M7 MCU, 216 MHz, 2 MB Flash, 512 KB SRAM
    • Digital I/O: 2x buffered inputs and 2x buffered outputs (alternative functions: UART, PWM out)
    • Rotary encoder with switch
    • 1x user switch
    • 3x dedicated SPI channels (2x Chip selects per channel), 40-pin IDC connector (DIB v1.0)
    • Battery backup (CR2032 button cell type)
    • USB FS OTG
    • Ethernet PHY (10/100 Mbit/s)
    • 32 KB I²C system EEPROM
    • 8 MB SDRAM
    • 8 GB Micro SD card
    • 4.3' TFT color resistive touchscreen display with brightness control
    • SWG/JTAG connector (optional)
    • Small on-board speaker
    • Four power relays for various power outputs coupling
    • Full range autoswitch AC input (115 / 230 Vac)
    • AC Soft-start (In-rush current limitation) and stand-by
    • AC IEC C14 inlet with two 20 x 5 mm fuse
    • AC power switch
    • AC power input protection and EMI filter
    • Standby LED indicator
    • Ø80 mm DC cooling fan with speed control
    • Kensington lock slot™
    • Compact size: 290 (W) x 123 (H) x 240 (D) mm
    • Weight (populated with 2x DCP405 and 1x DCM224): 4.05 kg

    Customer Reviews

    Be the first to write a review
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    Login

    Forgot password?

    Don't have an account yet?
    Create an account