Soldering Accessories
Elektor CheatKard (Electrical Engineering Reference Cards)
Electrical Engineering Tools in your PocketA set of 8 credit card-size, flexible cards packed with reference data all electronics designers need easy and instant access to. Whether you reverse-engineer an SMD board, figure out component values, or decide your best way to have a PCB manufactured, these gold plated cards provide instant technical guidance at real-life size for all aspects of PCB design state and electronics in general.There are 7 cards covering over 16 measurement techniques, over 100 schematic symbols, 2 value calculators (C, R), over 132 SMD footprints, 8 electronics laws & theory, and a powerful PCB design aid showing actual copper thickness, plating and finishing methods, track widths, and more. Plus, there’s an Elektor card showing their distinctive and legacy schematic drawing style and component symbols. To complete the set, there’s an Elektor cover card magnifying card for close inspection of PCB traces and SMD parts.Set comprises: 9 cards (flexible, 80 x 50 x 0.6 mm, 18K gold-plating) 1 Magnifying card 1 Carabiner key ring 1 Leather sleeve / pouch
€ 34,95
Members € 31,46
Fumetractor with LED Light
The soldering fume is sucked in by a 60 mm fan and released upwards through an easily replaceable activated carbon filter. All SMD components are already assembled; the user must assemble the rest. Features Small, compact design Quiet operation Enhanced LED lighting Easy to change the activated carbon filter Dimensions: 130 x 83 x 74mm 1-button usability Short press: turn the fan on or off Longer press (>0,5 s): turn the fan and the LED light on Extra long press (>1 s): turn everything on and change the brightness of LED-light Included in the kit: 1 x Board (all SMD parts pre-assembled, tested, with firmware, depending on variant) 1 x Fan (60 mm, >60.000 h) 1 x Fan guard grille 1 x Plug/socket for fan 1 x Short-travel pushbutton, angled 1 x LED light kit 4 x M4 screws (fan mounting) 4 x Nuts M4 + fuse 8 x Screws M3 (housing) 8 x Square nuts M3 2 x Activated carbon filter For more information, please visit the eHajo Dokuwiki.
Eurorack Stripboard
The Eurorack Stripboard is the most convenient way to build a simple DIY Eurorack synthesizer module. It works like a standard protoboard, but with specific additions for the Eurorack format. You can also use the Stripboard with the 4HP Front Panel. You can place up to 5 potentiometers or 5 jack connectors on the dedicated locations. The potentiometers can be any of 9 or 16 mm types, Alpha PKN160 for example. The Jack connectors are Cliff S6/BB mono style. With the Eurorack power supply interface, it's extremely easy to connect either a 16-pin or a 10-pin Eurorack power connector. The clear and detailed silkscreen labels indicate where the different voltages are located on the PCB. You can also add 2 filtering capacitors and 2 protection diodes. How to connect jacks and potentiometers The jack connectors are Cliff CL1384. They use the strips A, B, D and E. A and B are switched open when the male jack connector is inserted. D and E are the contacts to the male connector. E is Tip (the signal) and D is Ring (usually the 0V reference, often designated as “ground”). Note that Cliff jacks are insulated from the panel. The potentiometers are 9 mm (2.5 mm pin pitch) or 16 mm (5 mm pin pitch). Alpha 9 mm are a good choice. They align pretty nicely with Cliff jacks on the front panel. They connect to strips B, C and D. B is Counter Clock Wise pole. D is Clock Wise pole. and C is Wiper pole. Dimensions The PCB is 100 mm high and 50 mm wide. Thus, the depth for the Eurorack module will be 50 mm behind the panel. Downloads Documentation DIY Layout Creator
€ 9,95
Members € 8,96
Replacement Filter Set for Aoyue 8486 Fume Extractor
This complete replacement filter set for the Aoyue 8486 Fume Extractor contains a HEPA (High Efficiency Particulate Air) filter, a cotton air (sub) filter and an activated carbon air filter.
€ 49,95€ 34,95
Members identical
T80-B Soldering Tip for Soldering Station AE970D
T80-B (T80-D08) Soldering Tip for Soldering Station AE970D (0.8 mm, pointed)
€ 9,95
Members € 8,96
Fumetractor - USB-Charge-Addon
Fumetractor – USB-Charge-Addon
€ 19,95
Members € 17,96
T80-D Soldering Tip for Soldering Station AE970D
T80-D (T80-D12) Soldering Tip for Soldering Station AE970D (1.2 mm, chisel)
€ 9,95
Members € 8,96
T80-C Soldering Tip for Soldering Station AE970D
T80-C (T80-D16) Soldering Tip for Soldering Station AE970D (1.6 mm, chisel)
€ 9,95
Members € 8,96
T80-K Soldering Tip for Soldering Station AE970D
T80-K (T80-BC1) Soldering Tip for Soldering Station AE970D (1 mm, beveled)
€ 9,95
Members € 8,96
T80-I Soldering Tip for Soldering Station AE970D
T80-I (T80-BC3) Soldering Tip for Soldering Station AE970D (3 mm, beveled)
