Great Scott Gadgets HackRF One Software Defined Radio (1 MHz to 6 GHz)

  • BrandGreat Scott Gadgets

Description

HackRF One is a Software Defined Radio (SDR) peripheral capable of transmission or reception of radio signals from 1 MHz to 6 GHz. Designed to enable test and development of modern and next generation radio technologies, HackRF One is an open source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation.

Specifications

  • 1 MHz to 6 GHz operating frequency
  • Half-duplex transceiver
  • Up to 20 million samples per second
  • 8-bit quadrature samples (8-bit I and 8-bit Q)
  • Compatible with GNU Radio, SDR and more
  • Software-configurable RX and TX gain and baseband filter
  • Software-controlled antenna port power (50 mA at 3.3 V)
  • SMA female antenna connector
  • SMA female clock input and output for synchronization
  • Convenient buttons for programming
  • Internal pin headers for expansion
  • Hi-Speed USB 2.0
  • USB-powered
  • Open source hardware

HackRF One is test equipment for RF systems. It has not been tested for compliance with regulations governing transmission of radio signals. You are responsible for using your HackRF One legally.

Included

  • 1x HackRF One
  • 1x Injection molded plastic enclosure
  • 1x micro-USB cable

Note: An antenna is not included. ANT500 is recommended as a starter antenna for HackRF One.

Downloads


Product form

HackRF One is a Software Defined Radio (SDR) peripheral capable of transmission or reception of radio signals from 1 MHz to... Read more

€ 339,00€ 299,00 incl. VAT
Members identical

      Details

      SKU: 18306
      EAN: 0636824571091

      Description

      HackRF One is a Software Defined Radio (SDR) peripheral capable of transmission or reception of radio signals from 1 MHz to 6 GHz. Designed to enable test and development of modern and next generation radio technologies, HackRF One is an open source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation.

      Specifications

      • 1 MHz to 6 GHz operating frequency
      • Half-duplex transceiver
      • Up to 20 million samples per second
      • 8-bit quadrature samples (8-bit I and 8-bit Q)
      • Compatible with GNU Radio, SDR and more
      • Software-configurable RX and TX gain and baseband filter
      • Software-controlled antenna port power (50 mA at 3.3 V)
      • SMA female antenna connector
      • SMA female clock input and output for synchronization
      • Convenient buttons for programming
      • Internal pin headers for expansion
      • Hi-Speed USB 2.0
      • USB-powered
      • Open source hardware

      HackRF One is test equipment for RF systems. It has not been tested for compliance with regulations governing transmission of radio signals. You are responsible for using your HackRF One legally.

      Included

      • 1x HackRF One
      • 1x Injection molded plastic enclosure
      • 1x micro-USB cable

      Note: An antenna is not included. ANT500 is recommended as a starter antenna for HackRF One.

      Downloads


      Customer Reviews

      Based on 5 reviews
      80%
      (4)
      20%
      (1)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      C
      Corné O.
      Analoge en digitale ATV ontvangen.

      Amateur televisie.
      Ik gebruik (oa) deze HackRF tijdens de ATV contest van de VERON voor het ontvangen van analoge en digitale ATV signalen. Het grote frequentiegebied maakt dat ik geen separate up- en downconverters nodig heb, ik kan 10m 6m 4m en ook 13 , 9 en 6cm rechtstreeks ontvangen! Een bandfilter voor elke band is echter wel noodzakelijk, evenals een antennevertsterker voor de hogere banden. Het programma wat ik gebruik is SDRAngel, daar kruipt wel wat tijd in om de juiste instellingen te vinden. Ik gebruik de HackRF (nog?) niet om te zenden...

      H
      Harko
      HackRF use Linux!

      Nice gadget, but if you want to use it also for transmitting, then leave windows aside and use Linux! For rx in Windows use uSDR that works fine with it, I use it here myself standalone with a portapack as a kit on this unit, so you can use it without a laptop, be aware that this device is very broad band and therefore has a lot of trouble with birdies because there is hardly any filtering, So if you want to use it only for a certain frequency area choose a tuned rubber Duck antenna, this will also prevent you from blowing up 1 of the mmics by too much signal or misadjustment see various forums what you can do with it, the applications are almost limitless!

      H
      Harko
      HackRF, gebruik Linux!

      Leuk speeltje, maar als je er ook voor zenden wil gebruiken laat dan windows links liggen en gebruik Linux! Voor rx in Windows gebruik uSDR dat werkt er prima mee, ik gebruik hem hier zelf standalone met een portapack die je als kit op deze unit prikt waardoor je hem zonder laptop kan gebruiken, wees bewust dat dit speeltje erg breedbandig is en dus veel last heeft van birdies aangezien er amper enige vorm van filtering is, dus wil je hem alleen voor een bepaald frequentie gebied gebruiken kies dan een hiervoor afgestemde rubber Duck antenne, hiermee voorkom je bovendien dat je 1 van de mmics opblaast door te veel aan signaal of misaanpassing zie diverse forums wat je er allemaal mee kan, de toepassingen zijn haast onbegrensd!

      D
      Dr V.
      Executive Director- OMEGA Research Laboratories

      I`ve compared several modules and the ease and versatility of RFHacker One has convinced me that this is the one to buy. We will be developing it, among several other projects, as an RF spectrum analyzer.

      S
      SURESH K.
      RF Engineer

      Very useful work

      Recently viewed products

      Login

      Forgot password?

      Don't have an account yet?
      Create an account