ESP Terminal (ESP32-S3 based Development Board with 3.5" Capacitive TFT Touch Display)

  • BrandElecrow

Description

This ESP32 terminal is a microcontroller based on the ESP32 master. It adopts Xtensa 32-bit LX7 dual-core processor with a main frequency of up to 240 Mhz, supports 2.4 GHz Wi-Fi and Bluetooth 5 (LE), and can easily handle common edge terminal device application scenarios, such as industrial control, agricultural production environment detection and processing, intelligent logistics monitoring, smart home scenarios and more.

The ESP32 module also has a 3.5-inch parallel RGB interface capacitive touch screen with a resolution of 320x480 to ensure perfect image output at a frame rate 60 FPS. The 4 Crowtail interfaces on the back of this terminal can be used with Crowtail series sensors, plug and play, and create more interesting projects quickly and conveniently. In addition, it is also equipped with an SD card slot for extended storage (SPI leads) and a buzzer function.

The ESP32 touchscreen supports ESP-IDF and Arduino IDE development and is compatible with Python/MicroPython/Arduino. It also supports LVGL, which is the most popular free and open-source embedded graphics library to create beautiful UIs for any MCU, MPU, and display type. Now it has also obtained the official certification of LVGL. LVGL's board certificate shows that the boards can be easily used with LVGL and has decent performance for UI applications. The onboard charging circuit and lithium battery interface can use the type-C power supply interface to supply power and charge the battery at the same time, providing more outdoor scene expansion possibilities.

Features

  • Integrated ESP32-S3 module, which is support 2.4 GHz Wi-Fi and Bluetooth 5 (LE)
  • LCD 3.5 inches parallel TFT-LCD with 320x480 resolution
  • Compatible with Arduino/Python/MicrmoPython
  • Mature software support, support ESP-IDF and Arduino IDE development
  • Support open-source Graphics Library-LVGL
  • Support 1T1R mode, data rate up to 150 Mbps, Wireless Multimedia (WMM)
  • Perfect security mechanism, support AES-128/256, Hash, RSA, HMAC, digital signatures and secure boot
  • Onboard charging chip and interface, use type-C interface to charge
  • With 4 Crowtail interfaces (HY2.0-4P connector), plug and play with various Crowtail sensor

Applications

  • Smart Home
  • Industrial Control
  • Medical Monitor
  • Home Appliance Display
  • Logistics Monitoring

Specifications

  • ESP32-S3 module with 16 MB Flash and 8 MB PSRAM
  • Wi-Fi Protocol: 802.11b/g/n (802.11n up to 150 Mbps) Wi-Fi Frequency Range: 2.402-2.483 Ghz
  • Support Bluetooth 5
  • With 4 Crowtail interfaces (HY2.0-4P connector) and onboard Micro TF card slot
  • 3.5-inch TFT LCD RGB true color LCD screen with 320x480 resolution
  • Driver chip: ILI9488 (16-bit parallel line)
  • Capacitive touch panel controller IC FT6236 series
  • Operating Voltage: DC 5 V-500 mA
  • Sleep current:
    • USB power supply: 6.86 mA
    • Lithium battery power supply: 3.23 mA
  • LiPo Battery Interface: PH2.0
  • Operating temperature: -10°C ~ 65°C
  • Active Area: 73.63 x 49.79 mm (L x W)
  • Dimensions: 106 x 66 x 13 mm (L x W x H)

Included

  • 1x 3.5-inch ESP RGB Display with Acrylic Shell
  • 1x USB-C Cable

Downloads

Product form

This ESP32 terminal is a microcontroller based on the ESP32 master. It adopts Xtensa 32-bit LX7 dual-core processor with a... Read more

€ 44,95 incl. VAT
Members € 40,46

    • Ship today? Order within Nov 23, 2024 17:00:00 +0100

    Details

    SKU: 20526
    EAN: 6973553470108

    Description

    This ESP32 terminal is a microcontroller based on the ESP32 master. It adopts Xtensa 32-bit LX7 dual-core processor with a main frequency of up to 240 Mhz, supports 2.4 GHz Wi-Fi and Bluetooth 5 (LE), and can easily handle common edge terminal device application scenarios, such as industrial control, agricultural production environment detection and processing, intelligent logistics monitoring, smart home scenarios and more.

    The ESP32 module also has a 3.5-inch parallel RGB interface capacitive touch screen with a resolution of 320x480 to ensure perfect image output at a frame rate 60 FPS. The 4 Crowtail interfaces on the back of this terminal can be used with Crowtail series sensors, plug and play, and create more interesting projects quickly and conveniently. In addition, it is also equipped with an SD card slot for extended storage (SPI leads) and a buzzer function.

    The ESP32 touchscreen supports ESP-IDF and Arduino IDE development and is compatible with Python/MicroPython/Arduino. It also supports LVGL, which is the most popular free and open-source embedded graphics library to create beautiful UIs for any MCU, MPU, and display type. Now it has also obtained the official certification of LVGL. LVGL's board certificate shows that the boards can be easily used with LVGL and has decent performance for UI applications. The onboard charging circuit and lithium battery interface can use the type-C power supply interface to supply power and charge the battery at the same time, providing more outdoor scene expansion possibilities.

    Features

    • Integrated ESP32-S3 module, which is support 2.4 GHz Wi-Fi and Bluetooth 5 (LE)
    • LCD 3.5 inches parallel TFT-LCD with 320x480 resolution
    • Compatible with Arduino/Python/MicrmoPython
    • Mature software support, support ESP-IDF and Arduino IDE development
    • Support open-source Graphics Library-LVGL
    • Support 1T1R mode, data rate up to 150 Mbps, Wireless Multimedia (WMM)
    • Perfect security mechanism, support AES-128/256, Hash, RSA, HMAC, digital signatures and secure boot
    • Onboard charging chip and interface, use type-C interface to charge
    • With 4 Crowtail interfaces (HY2.0-4P connector), plug and play with various Crowtail sensor

    Applications

    • Smart Home
    • Industrial Control
    • Medical Monitor
    • Home Appliance Display
    • Logistics Monitoring

    Specifications

    • ESP32-S3 module with 16 MB Flash and 8 MB PSRAM
    • Wi-Fi Protocol: 802.11b/g/n (802.11n up to 150 Mbps) Wi-Fi Frequency Range: 2.402-2.483 Ghz
    • Support Bluetooth 5
    • With 4 Crowtail interfaces (HY2.0-4P connector) and onboard Micro TF card slot
    • 3.5-inch TFT LCD RGB true color LCD screen with 320x480 resolution
    • Driver chip: ILI9488 (16-bit parallel line)
    • Capacitive touch panel controller IC FT6236 series
    • Operating Voltage: DC 5 V-500 mA
    • Sleep current:
      • USB power supply: 6.86 mA
      • Lithium battery power supply: 3.23 mA
    • LiPo Battery Interface: PH2.0
    • Operating temperature: -10°C ~ 65°C
    • Active Area: 73.63 x 49.79 mm (L x W)
    • Dimensions: 106 x 66 x 13 mm (L x W x H)

    Included

    • 1x 3.5-inch ESP RGB Display with Acrylic Shell
    • 1x USB-C Cable

    Downloads

    Customer Reviews

    Based on 2 reviews
    0%
    (0)
    100%
    (2)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    P
    Philippe
    GPIO

    Très intéressant mais super pauvre en GPIO.

    M
    Marcel
    Use different USB cable

    Extra information: The supplied USB cable only seems to provide power. To communicate with the ESP Terminal (e.g. for programming a new image), you need to use a cable that also has the data-lines connected. I used the one from my phone and then all works as expected.
    The demo-app looks very good and the interaction is very fast, did not have time to upload my own apps.

    Login

    Forgot password?

    Don't have an account yet?
    Create an account