Description
This bundle is all about designing projects based on the 555 timer IC. The book features over 45 fully tested and documented projects. Together with the kit, which contains more than 130 through-hole components, you can build all the projects described on a breadboard. The setup also makes it easy to modify and experiment with the projects.
Over 45 Builds for the Legendary 555 Chip (and the 556, 558)
Some of the projects in the book are:
- Alternately Flashing Two LEDs
- Changing LED Flashing Rate
- Touch Sensor On/Off Switch
- Switch On/Off Delay
- Light-Dependent Sound
- Dark/Light Switch
- Tone Burst Generator
- Long Duration Timer
- Chasing LEDs
- LED Roulette Game
- Traffic Lights
- Continuity Tester
- Electronic Lock
- Switch Contact Debouncing
- Toy Electronic Organ
- Multiple Sensor Alarm System
- Metronome
- Voltage Multipliers
- Electronic Dice
- 7-Segment Display Counter
- Motor Control
- 7-Segment Display Dice
- Electronic Siren
- Various Other Projects
Kit Contents
Resistors
- 1x 15 kΩ
- 1x 68 kΩ
- 2x 47 kΩ
- 1x 82 kΩ
- 2x 820 Ω
- 1x 8.2 kΩ
- 3x 10 kΩ
- 1x 1.8 kΩ
- 1x 6.8 kΩ
- 14x 2.2 kΩ
- 10x 680 Ω
- 1x 27 kΩ
- 1x 5.6 kΩ
- 1x 560 kΩ
- 1x 4.7 kΩ
- 1x 3.3 kΩ
- 3x 33 kΩ
- 1x 36 kΩ
- 2x 100 kΩ
- 5x 1 kΩ
- 1x 3.9 kΩ
- 2x 56 kΩ
- 2x 12 kΩ
- 1x 10 kΩ potentiometer
- 1x 1 MΩ potentiometer
- 2x 50 kΩ potentiometer
- 3x 20 kΩ potentiometer
- 1x 10 kΩ potentiometer
- 1x 10 kΩ potentiometer
- 1x 50 kΩ potentiometer
- 1x 100 kΩ potentiometer
- 1x 50 kΩ potentiometer
Capacitors
- 1x 0.33 μF
- 1x 1 μF
- 1x 10 nF
- 1x 22 nF
- 1x 47 nF
- 1x 100 nF
- 1x 10 μF electrolytic
- 1x 33 μF electrolytic
- 2x 100 μF electrolytic
LEDs
- 10x 5 mm red LED
- 10x 3 mm red LED
- 3x 3 mm yellow LED
- 3x 3 mm green LED
- 1x Common-cathode 7-segment LED
Semiconductors
- 3x 555 timer
- 1x CD4017 counter
- 1x CD4026 counter
- 1x CD4011 NAND gate
- 4x 1N4148 diode
- 1x IRFZ46N MOSFET
- 1x Thermistor
- 1x Light dependent resistor (LDR)
Miscellaneous
- 1x Passive buzzer
- 1x Active buzzer
- 1x SG90 servo
- 1x 8 Ω mini loudspeaker
- 1x 9 V DC brushed motor
- 1x 5 V relay
- 1x 9 V battery clip
- 7x Pushbutton switches
- 1x Breadboard
- 1x Breadboard jumper wires
