Elektor Quasi-Analog Clockwork

  • BrandElektor Labs

Description

The Elektor Quasi-Analog Clockwork (Dimensions: 160 x 245 mm) is a digital clock with an analog look and feel.

The clock consists of 144 3-mm LEDs in a circle, indicating 12 hours with a 5-minute resolution. 11 standard logic ICs are used. All components in the kit are through hole.

The circuit uses standard HC-logic and still one 4000-logic IC (CD4060), a 32.768 kHz quarts reference clock and a 5 V power supply. Any small 5 VDC adapter (not included) can be connected via a small screw-terminal block on the board.

The quasi-analogue clockwork uses 144 LEDs (light emitting diodes) to indicate the time on a round, quasi-analogue dial with a diameter of about 143 mm. One of twelve green LEDs lights at maximum intensity to mark the hours, while the other eleven are dimmed. Between two green LEDs sit 11 red LEDs, each of which represents a period of five minutes. In this way, the time is indicated with an accuracy of five minutes. This would seem to be enough in view of the mostly decorative function of the present clockwork.

Construction of the clock is fairly easy as all components are through hole. A detailed description of how to build the Quasi-Analog Clockwork can be found in the manual of this kit. It can be downloaded here. Please read the manual before heating up the soldering iron!

Specifications

Time display 12 hours in a circle
Display 144 LEDs
LED circle 132 red LEDs, 12 green LEDs
Resolution display 5 minutes
Seconds indication 1 LED in center of circle, blinking at 0.5 Hz
Technology 10 HC-logic series IC’s, 1x 4000-logic series IC
Reference signal 32 kHz quartz oscillator (adjustable)
Set clock 1 push button, 5 minutes step
Power supply 5 V (Power Supply not included)
Dimensions 160 x 245 mm

Included

  • Elektor PCB 240118-1
  • All Components
  • Wooden Stand

Bill of Materials

  • Resistors
    • R1, R22, R24 = 2.2 kΩ
    • R2 = 390 kΩ
    • R3, R5, R6, R7 = 82 kΩ
    • R4 = 1 kΩ
    • R8-R19 = 8.2 kΩ
    • R20 = 20 MΩ
    • R21 = 330 kΩ
    • R23 = 560 Ω
    • R25 = 470 Ω
    • R26 = 100 kΩ
  • Capacitors
    • C1-C4, C8-C18 = 100 nF, 50 V
    • C5 =22 pF, 50 V
    • C6 = 10 pF, 50 V
    • C7 = 3-10 pF trimmer
  • Semiconductors
    • D1, D13, D25, D37, D49, D61, D73. D85, D97, D109, D121, D133 = LED, green, 3 mm
    • D2-D12, D14-D24, D26-D36, D38-D48, D50-D60, D62-D72, D74-D84, D86-D96, D98-D108, D110-D120, D122-D132, D134-D144, D162-D163 = LED, red, 3 mm
    • D145-D156 = 1N4148 DO-35
    • D164 = 1N4001 DO-41
    • T1, T2 = BC547B
    • IC1 = CD4060, DIP-16
    • IC2 = 74HC21, DIP-14
    • IC3, IC4 = 74HC132, DIP-14
    • IC5, IC6 = 74HC4024, DIP-14
    • IC7, IC8, IC9, IC10 = 74HC4051, DIP-16
    • IC11 = 7
  • Miscellaneous
    • K1 = 2-way PCB terminal block, 3.5 mm grid
    • S1 = 6 mm tactile pushbutton
    • X1 = 32.768 kHz crystal
Product form

The Elektor Quasi-Analog Clockwork (Dimensions: 160 x 245 mm) is a digital clock with an analog look and feel. The... Read more

€ 79,95 incl. VAT
Members € 71,96

      Details

      SKU: 20944
      EAN: 7442105133147

      Description

      The Elektor Quasi-Analog Clockwork (Dimensions: 160 x 245 mm) is a digital clock with an analog look and feel.

      The clock consists of 144 3-mm LEDs in a circle, indicating 12 hours with a 5-minute resolution. 11 standard logic ICs are used. All components in the kit are through hole.

      The circuit uses standard HC-logic and still one 4000-logic IC (CD4060), a 32.768 kHz quarts reference clock and a 5 V power supply. Any small 5 VDC adapter (not included) can be connected via a small screw-terminal block on the board.

      The quasi-analogue clockwork uses 144 LEDs (light emitting diodes) to indicate the time on a round, quasi-analogue dial with a diameter of about 143 mm. One of twelve green LEDs lights at maximum intensity to mark the hours, while the other eleven are dimmed. Between two green LEDs sit 11 red LEDs, each of which represents a period of five minutes. In this way, the time is indicated with an accuracy of five minutes. This would seem to be enough in view of the mostly decorative function of the present clockwork.

      Construction of the clock is fairly easy as all components are through hole. A detailed description of how to build the Quasi-Analog Clockwork can be found in the manual of this kit. It can be downloaded here. Please read the manual before heating up the soldering iron!

      Specifications

      Time display 12 hours in a circle
      Display 144 LEDs
      LED circle 132 red LEDs, 12 green LEDs
      Resolution display 5 minutes
      Seconds indication 1 LED in center of circle, blinking at 0.5 Hz
      Technology 10 HC-logic series IC’s, 1x 4000-logic series IC
      Reference signal 32 kHz quartz oscillator (adjustable)
      Set clock 1 push button, 5 minutes step
      Power supply 5 V (Power Supply not included)
      Dimensions 160 x 245 mm

      Included

      • Elektor PCB 240118-1
      • All Components
      • Wooden Stand

      Bill of Materials

      • Resistors
        • R1, R22, R24 = 2.2 kΩ
        • R2 = 390 kΩ
        • R3, R5, R6, R7 = 82 kΩ
        • R4 = 1 kΩ
        • R8-R19 = 8.2 kΩ
        • R20 = 20 MΩ
        • R21 = 330 kΩ
        • R23 = 560 Ω
        • R25 = 470 Ω
        • R26 = 100 kΩ
      • Capacitors
        • C1-C4, C8-C18 = 100 nF, 50 V
        • C5 =22 pF, 50 V
        • C6 = 10 pF, 50 V
        • C7 = 3-10 pF trimmer
      • Semiconductors
        • D1, D13, D25, D37, D49, D61, D73. D85, D97, D109, D121, D133 = LED, green, 3 mm
        • D2-D12, D14-D24, D26-D36, D38-D48, D50-D60, D62-D72, D74-D84, D86-D96, D98-D108, D110-D120, D122-D132, D134-D144, D162-D163 = LED, red, 3 mm
        • D145-D156 = 1N4148 DO-35
        • D164 = 1N4001 DO-41
        • T1, T2 = BC547B
        • IC1 = CD4060, DIP-16
        • IC2 = 74HC21, DIP-14
        • IC3, IC4 = 74HC132, DIP-14
        • IC5, IC6 = 74HC4024, DIP-14
        • IC7, IC8, IC9, IC10 = 74HC4051, DIP-16
        • IC11 = 7
      • Miscellaneous
        • K1 = 2-way PCB terminal block, 3.5 mm grid
        • S1 = 6 mm tactile pushbutton
        • X1 = 32.768 kHz crystal

      Customer Reviews

      Based on 3 reviews
      67%
      (2)
      33%
      (1)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      B
      Birger L.
      Elektor analog clockwork kit.

      Svert intresangt byggesett,gleder meg til arbeidet takk.

      J
      Jean M.
      Mooi

      Dit is een hele mooie afgewerke print
      Ben heel tevreden.

      M
      Marcel
      Horloge

      Super horloge beau rendu et surtout de nuit c’est joli. Relativement facile à souder les instructions sont claires mais nécessitent un peu d’interprétation entre ce qui est imprimé sur le pcb et les instructions.
      4 étoiles car il manquait une Led rouge et une Led vert à rendu l’âme après 2 heures de fonctionnement. Si non elle fonctionne bien.

      Login

      Forgot password?

      Don't have an account yet?
      Create an account