FM Radio Kit

Description

This DIY kit (HU-017A) is a wireless FM radio receiver with a 4-digit 7-segment display. It operates within the global FM receiving frequency band of 87.0-108.0 MHz, making it suitable for use in any country or region. The kit offers two power supply modes, allowing you to use it both at home and outdoors. This DIY electronic product will help you understand circuits and improve your soldering skills.

Features

  • 87.0-108.0 MHz FM Radio: Built-in RDA5807 FM data processor with a standard FM receiving frequency band. The FM frequency can be adjusted using the F+ and F- buttons.
  • Adjustable Volume: Two volume adjustment methods – button and potentiometer. There are 15 volume levels.
  • Active & Passive Audio Output: The kit has a built-in 0.5 W power amplifier to drive 8 Ω speakers directly. It also outputs audio signals to headsets or loudspeakers with AUX interfaces, allowing personal listening and sharing of FM audio.
  • Configured with a 25 cm dedicated FM antenna and a (red) 4-digit 7-segment display for real-time display of FM radio frequency. The transparent acrylic shell protects the internal circuit board. It supports dual power supply methods – 5 V USB and 2x 1.5 V (AA) batteries.
  • DIY Hand Soldering: The kit comes with various components that need to be installed manually. It helps exercise and improve soldering skills, making it suitable for electronics hobbyists, beginners, and educational purposes.

Specifications

Operating voltage DC 3 V/5 V
Output impedance 8 Ω
Output power 0.5 W
Output channel Mono
Receiver frequency 87.0 MHz~108.0 MHz
Frequency accuracy 0.1 MHz
Operating temperature −40°C to +85°C
Operating humidity 5% to 95% RH
Dimensions 107 x 70 x 23 mm

IMPORTANT: Remove the batteries when powering the radio over to USB.

Included

  • 1x PCB
  • 1x RDA5807M FM Receiver
  • 1x STC15W404AS MCU
  • 1x IC Socket
  • 1x 74HC595D Register
  • 1x TDA2822M Amplifier
  • 1x IC Socket
  • 1x AMS1117-3.3 V Voltage Converter
  • 18x Metal Film Resistor
  • 1x Potentiometer
  • 4x Ceramic Capacitor
  • 5x Electrolytic Capacitor
  • 4x S8550 Transistor
  • 1x Red LED
  • 1x 4-digit 7-segment Display
  • 1x Toggle Switch
  • 1x SMD Micro USB Socket
  • 1x Radio Antenna
  • 1x AUX Audio Socket
  • 4x Black Button
  • 4x Button Cap
  • 1x 0.5 W/8 Ω Speaker
  • 1x Red/Black Wire
  • 2x Double-sided adhesive
  • 1x AA Battery Box
  • 1x USB cable
  • 6x Acrylic Board
  • 4x Nylon Column Screw
  • 4x M3 Screw
  • 4x M3 Nut
  • 4x M2x22 mm Screw
  • 1x M2x6 mm Screw
  • 5x M2 Nut
Product form

This DIY kit (HU-017A) is a wireless FM radio receiver with a 4-digit 7-segment display. It operates within the global... Read more

€ 29,95€ 24,95 incl. VAT
Members identical

      Details

      SKU: 20866
      EAN: 020866

      Description

      This DIY kit (HU-017A) is a wireless FM radio receiver with a 4-digit 7-segment display. It operates within the global FM receiving frequency band of 87.0-108.0 MHz, making it suitable for use in any country or region. The kit offers two power supply modes, allowing you to use it both at home and outdoors. This DIY electronic product will help you understand circuits and improve your soldering skills.

      Features

      • 87.0-108.0 MHz FM Radio: Built-in RDA5807 FM data processor with a standard FM receiving frequency band. The FM frequency can be adjusted using the F+ and F- buttons.
      • Adjustable Volume: Two volume adjustment methods – button and potentiometer. There are 15 volume levels.
      • Active & Passive Audio Output: The kit has a built-in 0.5 W power amplifier to drive 8 Ω speakers directly. It also outputs audio signals to headsets or loudspeakers with AUX interfaces, allowing personal listening and sharing of FM audio.
      • Configured with a 25 cm dedicated FM antenna and a (red) 4-digit 7-segment display for real-time display of FM radio frequency. The transparent acrylic shell protects the internal circuit board. It supports dual power supply methods – 5 V USB and 2x 1.5 V (AA) batteries.
      • DIY Hand Soldering: The kit comes with various components that need to be installed manually. It helps exercise and improve soldering skills, making it suitable for electronics hobbyists, beginners, and educational purposes.

      Specifications

      Operating voltage DC 3 V/5 V
      Output impedance 8 Ω
      Output power 0.5 W
      Output channel Mono
      Receiver frequency 87.0 MHz~108.0 MHz
      Frequency accuracy 0.1 MHz
      Operating temperature −40°C to +85°C
      Operating humidity 5% to 95% RH
      Dimensions 107 x 70 x 23 mm

      IMPORTANT: Remove the batteries when powering the radio over to USB.

      Included

      • 1x PCB
      • 1x RDA5807M FM Receiver
      • 1x STC15W404AS MCU
      • 1x IC Socket
      • 1x 74HC595D Register
      • 1x TDA2822M Amplifier
      • 1x IC Socket
      • 1x AMS1117-3.3 V Voltage Converter
      • 18x Metal Film Resistor
      • 1x Potentiometer
      • 4x Ceramic Capacitor
      • 5x Electrolytic Capacitor
      • 4x S8550 Transistor
      • 1x Red LED
      • 1x 4-digit 7-segment Display
      • 1x Toggle Switch
      • 1x SMD Micro USB Socket
      • 1x Radio Antenna
      • 1x AUX Audio Socket
      • 4x Black Button
      • 4x Button Cap
      • 1x 0.5 W/8 Ω Speaker
      • 1x Red/Black Wire
      • 2x Double-sided adhesive
      • 1x AA Battery Box
      • 1x USB cable
      • 6x Acrylic Board
      • 4x Nylon Column Screw
      • 4x M3 Screw
      • 4x M3 Nut
      • 4x M2x22 mm Screw
      • 1x M2x6 mm Screw
      • 5x M2 Nut

      Customer Reviews

      Based on 10 reviews
      70%
      (7)
      10%
      (1)
      20%
      (2)
      0%
      (0)
      0%
      (0)
      A
      Arto L.
      Radio for fun

      Wonderful little gadget. It is smaller than I expected, but this is more my liking. Construction took some time, but the Radio works wonderfully. It is small and very compact. Only thing I desired was the transparent caseing as in the picture of the advertised product. But this other type of case gives me possibility to decorate It for example by painting. Anyway I already have had enjoyable time with the Radio.

      G
      Gerald C.
      Great service

      Well done great job

      K
      Karl H.W.

      Wie geht Frequenz Erweiterung um Flugfunk zu hören ?

      Der Bausatz ist super leicht zu bauen!
      Hat richtig Spaß gemacht.

      R
      Ralf K.
      Empfehlenswert

      Schöner, einfacher und durchdachter Bausatz. Funktioniert gut.

      m
      michael g.

      Ein bisschen kompliziert beim Einlöten der Bauteile. Aber ok

      H
      Henri C.
      Qualité

      très beau produit qualité irréprochable sauf que à 82 ans je n'ai encore jamais soudé de CMS, vos conseils sur le sujet seraient les bienvenus

      W
      William V.d.B.
      Degelijk product.

      Degelijk product.

      P
      Pauli N.
      FM receiver

      It was easy to build and it works well. The sound quality is improved
      by using a boom box.

      D
      Dirk H.
      DAB, DVB-T, DVB-C

      Surely cool but UKW / analog FM is almost dead, unfortunately. Is there anything similar (cheap, hackable, extendable) able to receive and decode DAB, DVB-T2 audio and/or DAB-C2 audio?

      P
      PATRICK M.
      Peut mieux faire !

      La doc laisse à désirer. Il faut une bonne loupe pour l'exploiter.

      Login

      Forgot password?

      Don't have an account yet?
      Create an account