Here you will find all kinds of parts, components and accessories you will need in various projects, starting from simple wires, sensors and displays to already pre-assembled modules and kits.
Components
M5Stack M5Stack Watering Unit with Moisture Sensor and Pump
The M5Stack Watering Unit integrates water pump and measuring plates for soil moisture detection and pump water control. It can be used for intelligent plant breeding scenarios and can easily achieve humidity detection and Irrigation control. The measurement electrode plate uses the capacitive design, which can effectively avoid the corrosion problem of the electrode plate in actual use compared with the resistive electrode plate. Features Capacitive measuring plate (corrosion resistant) Integrated 5 W power water pump LEGO compatible holes Application Plant cultivation Soil moisture detection Smart irrigation Included 1x Watering Unit 2x suction pipe 1x HY2.0-4P cable Pump power 5 W Weight 78 g Dimensions 192.5 mm x 24 mm x 33 mm
€ 16,95
Members € 15,26
M5Stack M5Stack AtomU ESP32 Development Kit with USB-A
ATOM U is a compact low-power consumption speech recognition IoT development kit. It adopts an ESP32 chipset, equipped with 2 low-power Xtensa 32-bit LX6 microprocessors with the main frequency of up to 240 MHz. Built-in USB-A interface, IR emitter, programmable RGB LED. Plug-and-play, easy to upload and download programs. Integrated Wi-Fi and digital microphone SPM1423 (I2S) for the clear sound record. suitable for HMI, Speech-to-Text (STT). Low-code development ATOM U supports UIFlow graphical programming platform, scripting-free, cloud push; Fully compatible with Arduino, MicroPython, ESP32-IDF, and other mainstream development platforms, to quickly build various applications. High integration ATOM U contains a USB-A port for programming/power supply, IR emitter, programmable RGB LED x1, button x1; Finely tuned RF circuit, providing stable and reliable wireless communication. Strong expandability ATOM U is easy access to M5Stack's hardware and software system. Features ESP32-PICO-D4 (2.4GHz Wi-Fi dual mode) Integrated programmable RGB LED and button Compact design Built-in IR emitter Expandable pinout and GROVE port Development platform: UIFlow MicroPython Arduino Specifications ESP32-PICO-D4 240MHz dual core, 600 DMIPS, 520KB SRAM, 2.4G Wi-Fi Microphone SPM1423 Microphone sensitivity 94 dB SPL@1 KHz Typical value: -22 dBFS Microphone signal-to-noise ratio 94 dB SPL@1 KHz, A-weighted Typical value: 61.4 dB Standby working current 40.4 mA Support input sound frequency 100 Hz ~ 10 KHz Support PDM clock frequency 1.0 ~ 3.25 MHz Weight 8.4 g Product size 52 x 20 x 10 mm Downloads Documentation
€ 19,95
Members € 17,96
M5Stack M5Stack Core Ink Development Kit (1.54" eInk Display)
The M5Stack Core Ink Development Kit is a new E-Ink display that uses an ESP32-Pico-D4 to take advantage of the benefits of the E-Ink technology. E-Ink displays are easier on the eyes, have extremely low power consumption and can retain an image even after they have run out of power. Features ESP32 Standard wireless functions WiFi, Bluetooth Internal 4M Flash Low Power Display 180-degree viewing angle Expansion ports Built-in Magnet Internal Battery Multi-function button Status LED Buzzer Deep Sleep functionality Applications IoT Terminal E-Book Industrial Control Panel Electronic Tag Included 1x CoreInk 1x LiPo 390 mAh 1x Type-C USB(20cm) Please note: avoid long-time high-frequency refresh when using it. The recommended refresh interval is (15s/time). Do not expose to ultraviolet rays for a long time, otherwise, it may cause irreversible damage to the ink screen.
€ 52,95
Members € 47,66
M5Stack M5Stack 6060-PUSH
M5Stack 6060-Push is an application-level module, which implements a motion & robotic control. You can completely customize it and make it advance with different length. Featuring a stepper motor, ATmega328 microprocessor and RS485 serial bus, it performs a linear motion, which you can adjust to your own needs. You have the ability to program the stepper motor to move a certain lenght with high precision. This type of module can be used in 3D printers or project, where you need linear push, etc.
M5Stack M5Stack ESP32 Basic Core IoT Development Kit V2.6
This module is a cost-effective entry-level IoT main controller. It adopts Espressif ESP32 chipset, equipped with 2 low-power Xtensa 32-bit LX6 microprocessors with main frequency up to 240 MHz. Built-in 16 MB flash memory, integrated 2.0-inch full-color HD IPS display panel, speaker, TFCard slot and other peripherals. The full-coverage housing ensures circuit stability even in complex industrial applications. Internal provides a variety interface resources (ADC/DAC/I²C/UART/SPI, etc.) and 15x IO pins at the bottom, which is highly developable. Ideal for a variety of product prototyping, industrial control, intelligent building application. High productization: Exquisite designs, Prototyping right into products Product-grade full-coverage cover for more stable circuit operation Low Code Development: Support UIFlow graphical programming platform, scripting-free, cloud push Fully compatible with mainstream development platforms such as Arduino and ESP32-IDF Support FreeRTOS, with dual-core and multitasking mechanism, it can perform the tasks efficiently, Program optimization. High Integration: 0 inch IPS display panel, speakers, 3x custom buttons Built-in lithium battery power, integrated power management chip, support Type-C interface Finely tuned RF circuit for stable and reliable wireless communication Strong Expandability: 15x IO leads Easy access to M5Stack's hardware and software ecology system, stackable module design, plug-and-play rich sensors expansion Features Based on ESP32 development 16 MB Flash Integrated full-color high-definition IPS display panel and a variety of hardware peripherals Rich resources interface, compatible with M5Stack stacking modules and sensors, highly expandable. 15x IO leads Compatible with multi-platform development: UIFlow MicroPython Arduino .NET nanoFramework Applications IoT Controller DIY creator works Smart home control Specifications ESP32-D0WDQ6-V3 240 MHz dual core, 600 DMIPS, 520 KB SRAM, Wi-Fi Flash 16 MB Input power 5 V @ 500 mA Interface 1x USB-C1y I²C IO G21, G22, G23, G19, G18, G3, G1, G16, G17, G2, G5, G25, G26, G35, G36 Button Physical button x 3 LCD screen 2.0' @ 320x240 ILI9342C IPS panel, maximum brightness 853nit Speaker 1W-0928 USB chip CH9102F Antenna 2.4G 3D Antenna Battery 110 mAh @ 3.7 V Cover Material Plastic (PC) Weight 47 g Dimensions 54 x 54 x 18 mm Included 1x M5Stack ESP32 Basic 10x Dupont line 1x USB-C cable (20 cm) 1x Manual 1x Sticker